EasyManuals Logo

EINHELL GH-EC 2040 User Manual

EINHELL GH-EC 2040
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
GB
- 19 -
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
Please note that batteries and lamps (e.g. light
bulbs) must be removed from the tool before it is
disposed of.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the Einhell Germany
AG.
Subject to technical changes
The product meets the requirements of EN
61000-3-11 and is subject to special connec-
tion conditions. This means that use of the
product at any freely selectable connection
point is not allowed.
Given unfavorable conditions in the power
supply the product can cause the voltage to
fluctuate temporarily.
The product is intended solely for use at con-
nection points that
a) do not exceed a maximum permitted mains
system impedance of Z sys = 0.3 Ω, or
b) have a continuous current-carrying capaci-
ty of the mains of at least 100 A per phase.
As the user, you are required to ensure, in
consultation with your electric power compa-
ny if necessary, that the connection point at
which you wish to operate the product meets
one of the two requirements, a) or b), named
above.
Anl_GH_EC_2040_EX_UK_SPK7.indb 19Anl_GH_EC_2040_EX_UK_SPK7.indb 19 24.08.2023 10:58:4624.08.2023 10:58:46

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL GH-EC 2040 and is the answer not in the manual?

EINHELL GH-EC 2040 Specifications

General IconGeneral
BrandEINHELL
ModelGH-EC 2040
CategoryChainsaw
LanguageEnglish

Related product manuals