EINHELL GE-LC 18 Li - User Manual

Questions and Answers

P
pjonesJul 30, 2025
Why is my EINHELL GE-LC 18 Li juddering, vibrating, or not sawing properly?
- J
  Judy SparksJul 30, 2025
  If your EINHELL Chainsaw is juddering, vibrating, or not sawing properly, it could be due to several reasons. First, check the chain tension and adjust it if it's too loose. Also, the chain might be blunt, so try re-sharpening or replacing it. If the chain is worn, replace it. Finally, ensure the saw teeth are pointing in the correct direction; if not, reinstall the saw chain correctly.
N
Nancy FosterAug 6, 2025
Why is the chain/guide rail on my EINHELL Chainsaw hot?
- J
  Jacob KennedyAug 6, 2025
  If the chain or guide rail on your EINHELL Chainsaw is getting hot, it could be due to a few reasons. Make sure there's enough oil in the tank; if not, fill it up. Also, the oil tank cap breather might be blocked, so try cleaning it. Another possibility is a blocked oil outlet, which you should clear. Finally, a blunt chain can cause this issue, so re-sharpen or replace the chain.
R
Robert OlsenAug 14, 2025
Why is the saw chain on my EINHELL Chainsaw dry?
- M
  Mary HerreraAug 14, 2025
  If your EINHELL Chainsaw's saw chain is dry, there are a few potential causes. You might not have enough oil in the tank, so fill it up. Alternatively, the oil tank cap breather could be blocked, in which case you should clean it. Finally, the oil outlet might be blocked; clear it to resolve the issue.
T
Terry ClineAug 22, 2025
How to fix EINHELL GE-LC 18 Li Chainsaw that does not work at all?
- M
  Michael DoyleAug 22, 2025
  If your EINHELL Chainsaw does not work, it could be due to the quick stop brake being triggered. To resolve this, pull the hand protection back to the normal position. Another possible cause is no power supply, so check the power supply.