How to lubricate a dry saw chain on EINHELL Chainsaw?
If the saw chain of your EINHELL Chainsaw is dry, you should: * Fill it up with oil. * Clean the oil tank cap. * Clear the oil outlet.
What to do if chain/guide rail of EINHELL GH-EC 1835 is hot?
If the chain or guide rail of your EINHELL Chainsaw is hot, you should: * Fill up with oil. * Clean the oil tank cap. * Clear the oil outlet. * Re-sharpen or replace the chain.
How to fix EINHELL GH-EC 1835 Chainsaw that does not work?
If your EINHELL Chainsaw does not work at all, you can try the following: * Check the power supply. * Try an alternative source of electrical power and replace the current source if necessary. * Check the cable and replace it if required. * Replace the fuse.
What to do if EINHELL GH-EC 1835 operates intermittently?
If your EINHELL Chainsaw operates intermittently, check the cable and replace it if required. If the problem persists, consult a specialist workshop.
Why my EINHELL GH-EC 1835 Chainsaw does not work?
If your EINHELL Chainsaw isn't working, there are several potential causes: * The quick stop brake might be engaged. To resolve this, pull the hand protection back to its normal position. * There might be no power supply. Ensure that the chainsaw is properly connected to a power source. * The mains outlet could be defective. Try using a different power outlet, and replace the original if necessary. * The power extension cable might be damaged. Inspect the cable for any damage and replace it if needed. * The fuse might be defective. In this case, replace the fuse.
Why is the chain/guide rail on my EINHELL GH-EC 1835 Chainsaw hot?
If the chain or guide rail of your EINHELL Chainsaw is getting hot, it could be due to: * Insufficient oil in the tank. Make sure to fill the tank with oil. * A blocked oil tank cap breather. Clean the oil tank cap to ensure proper ventilation. * A blocked oil outlet. Clear the oil outlet to allow for proper oil flow. * A blunt chain. Re-sharpen or replace the chain.
What to do if EINHELL GH-EC 1835 is vibrating too much?
If your EINHELL Chainsaw is juddering, vibrating, or not sawing properly, consider the following: * The chain tension might be too loose. Adjust the chain tension accordingly. * The chain could be blunt. Re-sharpen or replace the chain. * The chain might be worn. Replace the chain if it is worn. * The saw teeth might be pointing in the wrong direction. Reinstall the saw chain with the teeth facing in the correct direction.
What to do if chain/guide rail gets hot on my EINHELL GH-EC 1835 Chainsaw?
If the chain or guide rail on your EINHELL Chainsaw gets hot, it could be due to a few reasons. First, check if there is oil in the tank and fill it up if necessary. Also, the oil tank cap breather might be blocked, so clean it. Another possibility is that the oil outlet is blocked, so clear it. Finally, a blunt chain can also cause this issue, so re-sharpen or replace the chain.
How to fix EINHELL Chainsaw juddering, vibrating or not sawing properly?
If your EINHELL Chainsaw is juddering, vibrating, or not sawing properly, consider these potential causes: the chain tension might be too loose (adjust the chain tension), the chain could be blunt (re-sharpen or replace the chain), or the chain might be worn (replace the chain). Also, ensure the saw teeth are pointing in the correct direction; if not, reinstall the saw chain correctly.
What to do if the saw chain is dry on my EINHELL GH-EC 1835 Chainsaw?
If the saw chain on your EINHELL Chainsaw is dry, it could be due to: no oil in the tank (fill up with oil), the oil tank cap breather being blocked (clean the oil tank cap), or the oil outlet being blocked (clear the oil outlet).
Explains machine symbols and general power tool safety rules.
Covers safety of work area, electrical connections, and user.
Specific safety advice for chainsaw use.
Explains kickback and how to avoid it.
Identifies parts, lists contents, and defines intended use.
Specifications, noise/vibration data, and startup checks.
Guides for assembly, chain adjustments, and lubrication.
Power connection, switching on/off, and safety devices.
Techniques for safe and effective chainsaw usage.
Routine cleaning, upkeep, and ordering replacement parts.
Solutions for operational problems and malfunctions.
Guidelines for responsible environmental practices.
Contacting service and warranty details.
Statements confirming compliance with relevant standards.
General| Power source | AC |
|---|---|
| Chain gauge | 350 mm |
| Chain speed | 13.5 m/s |
| Product color | Black, Red |
| Automatic oiling | Yes |
| Chain bar length | 325 mm |
| Oil tank capacity | 0.16 L |
Weight and Dimensions| Weight | 5000 g |
|---|---|
| Package depth | 215 mm |
| Package width | 530 mm |
| Package height | 275 mm |
| Package weight | 5600 g |
To Next Page