EasyManua.ls Logo

EINHELL GE-LC 18/25 Li - User Manual

EINHELL GE-LC 18/25 Li
200 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GE-LC 18/25 Li
Art.-Nr.: 45.017.60 (1x3Ah) I.-Nr.: 21020
Art.-Nr.: 45.017.61 (Solo) I.-Nr.: 21020
9
D Originalbetriebsanleitung
Akku-Kettensäge
GB Original operating instructions
Cordless Chainsaw
F Mode d’emploi d’origine
Tronçonneuse sans fi l
I Istruzioni per l’uso originali
Motosega a batteria
S Original-bruksanvisning
Batteridriven kedjesåg
CZ Originální návod k obsluze
Akumulátorová řetězová pila
SK Originálny návod na obsluhu
Akumulátorová reťazová píla
NL Originele handleiding
Accu-kettingzaag
E Manual de instrucciones original
Motosierra de batería
FIN Alkuperäiskäyttöohje
Akkukäyttöinen ketjusaha
RUS Оригинальное руководство по
эксплуатации
Аккумуляторная цепочная пила
SLO Originalna navodila za uporabo
Akumulatorska verižna žaga
H Eredeti használati utasítás
Akkus-láncfűrész
Anl_GE_LC_18_25_Li_Kit_SPK9.indb 1Anl_GE_LC_18_25_Li_Kit_SPK9.indb 1 16.10.2020 10:38:2316.10.2020 10:38:23

Questions and Answers

  • G
    gregoryloweJul 29, 2025
    Why is my EINHELL Chainsaw juddering, vibrating, or not sawing properly?
    • M
      Mark JohnsonJul 29, 2025
      If your EINHELL Chainsaw is juddering, vibrating, or not sawing properly, it could be due to several reasons. First, check the chain tension and adjust it if it's too loose. Also, the chain might be blunt, so try re-sharpening or replacing it. If the chain is worn, replace it. Finally, ensure the saw teeth are pointing in the correct direction; if not, reinstall the saw chain correctly.
  • A
    Aaron JohnsonAug 7, 2025
    Why is the chain/guide rail on my EINHELL GE-LC 18/25 Li Chainsaw hot?
    • Z
      Zachary Alvarez MDAug 7, 2025
      If the chain or guide rail on your EINHELL Chainsaw is getting hot, it could be due to a few reasons. Make sure there's enough oil in the tank; if not, fill it up. Also, the oil tank cap breather might be blocked, so try cleaning it. Another possibility is a blocked oil outlet, which you should clear. Finally, a blunt chain can cause this issue, so re-sharpen or replace the chain.
  • J
    Jacob ClarkAug 17, 2025
    Why is the saw chain on my EINHELL GE-LC 18/25 Li dry?
    • M
      Michael AllenAug 17, 2025
      If your EINHELL Chainsaw's saw chain is dry, there are a few potential causes. You might not have enough oil in the tank, so fill it up. Alternatively, the oil tank cap breather could be blocked, in which case you should clean it. Finally, the oil outlet might be blocked; clear it to resolve the issue.

Summary

Safety Regulations

Product Layout and Supplied Items

Proper Use

Technical Data

Before Starting the Equipment

Assembly and Setup Procedures

Guides on fitting the cutter rail, saw chain, lubricating, and charging the battery.

Chain Tensioning

Operation

Switching the Chainsaw On and Off

Instructions on how to start and stop the cordless chainsaw safely.

Safety Devices Overview

Explanation of the built-in safety features like motor brake and chain brake.

Preparations for Use

Working with the Chainsaw

Tree Felling Procedures

Comprehensive guide on felling trees, including notch and cut execution, safety zones, and escape routes.

Post-Felling Operations

Kickback Safety and Prevention

Explains kickback and provides critical safety advice, including cutting tensioned wood.

Cleaning and Maintenance

Maintenance Tasks

Troubleshooting Common Issues

Charger Indicator Guide

EINHELL GE-LC 18/25 Li Specifications

General IconGeneral
Battery Voltage18 V
Battery Capacity2.5 Ah
Bar Length25 cm
Chain Gauge1.1 mm
Automatic OilerYes
Power SourceBattery
Chain Pitch9.525 mm
Cutting Length230 mm

Related product manuals