EasyManuals Logo

EINHELL RG-SA 1433 User Manual

EINHELL RG-SA 1433
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
GB
- 21 -
The equipment is intended for private use i.e. for
use in home and gardening environments.
Scari ers for private use are machines whose an-
nual operating time generally does not exceed 10
hours, during which the machine is primarily used
to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting
halls, and agricultural/forestry applications are
excluded.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order to
ensure that the equipment is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
Danger! Due to the high risk of bodily injury to
the user, the equipment may not be used to grind
up branch or hedge clippings. Moreover, the
equipment may not be used as a power cultivator
to level out high areas such as mole hills.
For safety reasons, the scari er may not be used
as a drive unit for other equipment or toolkits of
any kind, unless speci cally advised to do so by
the manufacturer.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage: ......................................... 230 V ~ 50 Hz
Power consumption: ................................ 1400 W
Working width: ............................................33 cm
Number of blades ................................20 pieces
Number of claws: ............................................ 48
Scarifying depth: ........................ - 3 / 3 / 7 / 9 mm
Protection class: ...........................................II /
Protection type: ............................................IPX4
Weight .........................................................13 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level ..................... 76.1 dB(A)
K
pA
uncertainty ............................................. 3 dB
L
WA
sound power level .......................... 99 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-mu s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Handle
Vibration emission value a
h
= 3.159 m/s
2
K uncertainty = 1.5 m/s
2
The speci ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the speci ed value
in exceptional circumstances.
The speci ed vibration value can be used to
compare the equipment with other electric power
tools.
The speci ed vibration value can be used for initi-
al assessment of a harmful e ect.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect wor-
king order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever ne-
cessary.
Switch the appliance off when it is not in use.
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
Anl_RG-SA_1433_SPK9.indb 21Anl_RG-SA_1433_SPK9.indb 21 31.03.2017 09:18:0431.03.2017 09:18:04

Table of Contents

Other manuals for EINHELL RG-SA 1433

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EINHELL RG-SA 1433 and is the answer not in the manual?

EINHELL RG-SA 1433 Specifications

General IconGeneral
Power1400 W
Product colorBlack, Red
Working width330 mm
Number of claws48
Number of knives20
Working depth (max)9 mm
Rear wheels diameter152 mm
Front wheels diameter175 mm
Recommended lawn area- m²
Collection box capacity28 L
Number of working depth positions3
AC input voltage230 V
AC input frequency50 Hz
Weight and Dimensions IconWeight and Dimensions
Depth600 mm
Width460 mm
Height355 mm
Weight12540 g
Package weight15230 g

Related product manuals