To Next PageTo Next Page
Need help?Do you have a question about the EINHELL SB 1020/1D and is the answer not in the manual?
General| Type | Hammer Drill |
|---|---|
| Voltage | 230 V |
| No-Load Speed | 0 - 3000 RPM |
| Max. Drilling Diameter (Metal) | 13 mm |
| Chuck Capacity | 1.5 - 13 mm |
| Power Source | Corded Electric |
| Chuck Type | Keyless |
Lists numbered parts of the pillar drill for identification.
Lists the parts included with the pillar drill package.
Specifies intended use for drilling metal, plastic, wood in private sector.
Covers voltage, earthing, extension cables, moisture, fire risk, work area, clothing.
Covers watching others, clean area, proper clothing, goggles, hair nets.
Covers checking tools, avoiding overloading, steady foothold, unplugging.
Step-by-step guide for assembling base, pillar, table, head, and handles.
Instructions for permanently fixing the machine base using mounting holes.
Explains On/Off buttons, forward/reverse, temporary operation limits.
Details inserting bits into scroll chucks and using tapered shanks.
Guide on adjusting spindle speed by moving the V-belt.
How to set the drilling depth using the scale ring and clamping screw.
Steps for setting the angle and height of the drill table.
Methods for securely clamping workpieces, emphasizing not using hands.
Precautions for drilling wood and guidance on selecting speeds based on material and bit diameter.
Instructions for performing countersinking and center-drilling at appropriate speeds.
Guidelines for keeping the machine clean, lubrication, and proper disposal of rags.
Information required when ordering spare parts from ISC GmbH.
Detailed technical data for various models including voltage, power, speeds, dimensions, and weight.
