EINHELL STE 2500 User Manual

10
GB
15. Troubleshooting
Fault
Engine does not start
Generator has too little or no
voltage
Cause
Automatic oil cut-out has not res-
ponded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
Remedy
Check the oil level, top up with
engine oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
Anleitung STE 2500 SPK1 21.11.2005 13:39 Uhr Seite 10

EINHELL STE 2500 Specifications

General

Brand	EINHELL
Model	STE 2500
Category	Portable Generator
Language	English