EINHELL TC-AC 190-24-8 User Manual

GB
- 19 -
8.7 Storage
 Warning!
Pull the mains plug out of the socket and ventilate
the appliance and all connected pneumatic tools.
Switch off the compressor and make sure that it is
secured in such a way that it cannot be started up
again by any unauthorized person.
Important!
Store the compressor only in a dry location.
Always store upright, never tilted!
8.8 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
Anl_SA_TC_AC_190_24_8_SPK8.indb 19Anl_SA_TC_AC_190_24_8_SPK8.indb 19 09.08.2016 13:39:5109.08.2016 13:39:51

EINHELL TC-AC 190-24-8 Specifications

General

Intake capacity	165 l/min
Pump motor speed	2850 RPM
Maximum operating pressure	8 bar
Product color	Black, Red
Number of cylinders	1
Motor power	1500 W
Power source	AC
AC input voltage	220-240 V
AC input frequency	50 Hz

Weight and Dimensions

Weight	20780 g
Package depth	578 mm
Package width	258 mm
Package height	572 mm
Package weight	22680 g