EasyManua.ls Logo

EINHELL TC-AC 190/24 - User Manual

EINHELL TC-AC 190/24
100 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TC-AC 190/24
Art.-Nr.: 40.073.35 I.-Nr.: 11014
1
D Originalbetriebsanleitung
Kompressor
GB Original operating instructions
Compressor
F Mode d’emploi d’origine
Compresseur
I Istruzioni per l’uso originali
Compressore
DK/ Original betjeningsvejledning
N Kompressor
S Original-bruksanvisning
Kompressor
HR/ Originalne upute za uporabu
BIH Kompresor
RS Originalna uputstva za upotrebu
Kompresor
CZ Originální návod k obsluze
Kompresor
SK Originálny návod na obsluhu
Kompresor
Anl_TC_AC_190_24_SPK1.indb 1Anl_TC_AC_190_24_SPK1.indb 1 06.08.14 14:4006.08.14 14:40

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the EINHELL TC-AC 190/24 and is the answer not in the manual?

EINHELL TC-AC 190/24 Specifications

General IconGeneral
Motor power1500 W
Power sourceAC
AC input voltage230 V
AC input frequency50 Hz
Noise level97 dB
Intake capacity160 l/min
Maximum airflow98 l/min
Minimum airflow60 l/min
Air tank capacity24 L
Pump motor speed (max)2850 RPM
Maximum operating pressure8 bar
Suitable forCar
Product colorBlack, Red
Housing material-
Number of cylinders1
Weight and Dimensions IconWeight and Dimensions
Depth547 mm
Width235 mm
Height543 mm
Weight19480 g
Package weight21100 g

Summary

1. Safety Regulations

Key Safety Instructions

Read all safety regulations, keep manual safe, and understand appliance usage limitations.

2. Layout and Items Supplied

2.1 Product Layout Overview

Visual identification of compressor components using numbered diagrams.

2.2 Checking Supplied Items

Procedure to verify all necessary parts are included upon delivery.

3. Proper Use

4. Technical Data

5. Before Starting the Equipment

6. Assembly and Starting

6.1 Fitting the Wheels

Instructions for attaching the wheels to the compressor unit for mobility.

6.2 Fitting the Supporting Feet

Instructions for attaching the supporting feet for stable compressor placement.

6.3 Replacing the Oil Sealing Plug

Procedure for removing transport protection and installing the oil sealing plug.

6.4 Fitting the Air Filter

Procedure for installing the air filter after removing transport protection.

6.5 Power Supply Considerations

Advice on electrical connections, voltage drop, and low-temperature start-up issues.

6.6 On;Off Switch Operation

How to correctly turn the compressor on and off using the integrated switch.

6.7 Adjusting the Pressure

Steps to set the desired working pressure using the pressure regulator and gauge.

6.8 Setting the Pressure Switch

Information on the automatic pressure switch's factory-set on and off points.

7. Replacing the Power Cable

8. Cleaning, Maintenance, and Ordering Spare Parts

8.1 General Cleaning Procedures

Guidelines for cleaning the compressor exterior and ensuring safety during the process.

8.2 Condensation Water Drainage

Procedure to drain condensation water from the pressure vessel and inspect for damage.

8.3 Safety Valve Testing

How to periodically test the safety valve to ensure its proper function.

8.4 Oil Level Check and Change Intervals

Procedure for checking oil level and recommended schedule for oil changes.

8.5 Changing the Oil

Detailed steps for draining old oil and refilling the compressor with new oil.

8.6 Cleaning the Intake Filter

Instructions for cleaning the intake filter to maintain optimal compressor performance.

8.7 Storage Instructions

Guidelines for safely storing the compressor, ensuring it's upright and secured.

8.8 Ordering Replacement Parts

Information needed to correctly order spare parts for the compressor.

9. Disposal and Recycling

10. Possible Causes of Failure

Service Information

Warranty Certificate

Related product manuals