To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-AG 125 and is the answer not in the manual?
General| Spindle thread | M14 |
|---|---|
| Idle speed (max) | 11000 RPM |
| Sound power level | 94.2 dB |
| Sound pressure level | 83.2 dB |
| Grinding disc diameter | 125 mm |
| Vibration level (grinding) | 4.9 m/s² |
| Vibration level uncertainty (grinding) | 1.5 m/s² |
| Input power | 850 W |
| Power source | AC |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Sound pressure level uncertainty | 3 dB |
| Product color | Black, Red |
Weight and Dimensions| Width | 115 mm |
|---|---|
| Height | 100 mm |
| Length | 295 mm |
| Weight | 2100 g |
| Package weight | 2300 g |
Details on the product's layout and the items included in the delivery package.
Guidelines for the correct and intended application of the angle grinder.
Information regarding the sound pressure and vibration emission values of the tool.
Cautionary note about the impact of noise on hearing and the need for ear protection.
Details on vibration emission values specific to sanding and grinding operations.
Pre-operational checks and setup procedures before using the angle grinder.
Explanation of the angle grinder's safety switch and ON/OFF mechanism.
Procedure for safely replacing grinding or cutting wheels using the provided tool.
Instructions on correct flange nut placement for various grinding and cutting wheels.
Procedures for cleaning, maintaining, and ordering replacement parts for the tool.
