EasyManua.ls Logo

EINHELL TC-PG 3500 W - User Manual

EINHELL TC-PG 3500 W
172 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TC-PG 3500 W
Art.-Nr.: 41.525.50 I.-Nr.: 11016
9
D Originalbetriebsanleitung
Stromerzeuger
GB Original operating instructions
Power Generator
F Instructions d’origine
Générateur de courant
I Istruzioni per l’uso originali
Generatore di corrente
DK/ Original betjeningsvejledning
N Generator
S Original-bruksanvisning
Strömgenerator
CZ Originální návod k obsluze
Generátor
SK Originálny návod na obsluhu
Elektrický generátor
NL Originele handleiding
Elektriciteitsgenerator
E Manual de instrucciones original
Grupo Electrogeno
FIN Alkuperäiskäyttöohje
Generaattori
RUS Оригинальное руководство по
эксплуатации
электрический генератор
SLO Originalna navodila za uporabo
Električni generator
H Eredeti használati utasítás
Áramfejlesztő
RO Instrucţiuni de utilizare originale
Generator de curent
GR Πρωτότυπες Οδηγίες χρήσης
Γεννήτρια
Anl_TC_PG_3500_W_SPK9.indb 1Anl_TC_PG_3500_W_SPK9.indb 1 31.07.2018 11:34:3531.07.2018 11:34:35

Table of Contents

Questions and Answers

  • Z
    Zachary FinleyAug 11, 2025
    What to do if my EINHELL TC-PG 3500 W Portable Generator engine does not start?
    • M
      Marcus JohnsonAug 11, 2025
      If your EINHELL Portable Generator's engine isn't starting, here are a few things to check: * **Oil Level:** The automatic oil cut-out might have been activated. Check the oil level and add more oil if needed. * **Spark Plug:** The spark plug could be dirty. Try cleaning or replacing it, ensuring the electrode spacing is 0.6 mm. * **Fuel:** Make sure there's enough fuel. Refuel the generator or have the fuel tap checked.
  • R
    Ronald RoachAug 18, 2025
    Why does my EINHELL TC-PG 3500 W have no voltage?
    • W
      walkerjohnAug 18, 2025
      If your EINHELL Portable Generator has little to no voltage, there are a few potential causes: * **Overcurrent Circuit-Breaker:** It may have tripped. Reset the circuit-breaker and try reducing the load on the generator. * **Air Filter:** A dirty air filter can cause issues. Clean or replace the air filter.
  • M
    Michelle PetersonAug 26, 2025
    How to fix an EINHELL TC-PG 3500 W that won't start?
    • W
      William WalshAug 26, 2025
      If your EINHELL Portable Generator is refusing to start, consider these possible reasons: * **Oil Safety:** The automatic oil cut-out might be preventing ignition. Verify the oil level and top it off if necessary. * **Spark Plug Condition:** A dirty spark plug can be the culprit. Clean or replace it, ensuring the electrode gap is set to 0.6 mm. * **Fuel Supply:** Ensure that the generator has fuel. Refuel or inspect the fuel tap.
  • L
    Lisa MclaughlinSep 2, 2025
    What to do if my EINHELL Portable Generator has low voltage?
    • D
      Danielle BallSep 2, 2025
      If your EINHELL Portable Generator is producing too little voltage, the controller or capacitor may be defective. In this case, contact your dealer.

EINHELL TC-PG 3500 W Specifications

General IconGeneral
Generator typeSynchronous
Continuous power (230 V)2600 W
Max. power (230 V)3100 W
Max. power (230 V) | 2 min3100 W
Rated current (230 V)11.3 A
Frequency50 Hz
Engine displacement212 cm³
Max. engine power4.1 kW
FuelPetrol
Fuel TypePetrol
Tank capacity15 L
Sound power level LWA96 dB
Noise Level96 dB
Voltage230 V
Number of Outlets2
Engine4-stroke, air-cooled
Operating time at 2/3 load10.7 h
IgnitionTransistor
Starting SystemRecoil start
Dimensions610 x 460 x 460 mm
Dimensions (L x W x H)610 x 460 x 460 mm
Outlet Type230 V

Related product manuals