To Next PageTo Next PageWhat to do if my EINHELL TC-PG 1000 engine does not start?
If your EINHELL Portable Generator's engine isn't starting, it might be due to the automatic oil cut-out. Check the oil level and top it up with engine oil if needed. Another possible reason is that the generator is out of fuel, so refuel it.
Why does my EINHELL Portable Generator have no voltage?
If your EINHELL Portable Generator has too little or no voltage, the overcurrent circuit-breaker may have triggered. Actuate the circuit-breaker and reduce the number of connected devices. The air filter might also be dirty, so clean or replace it. If these steps don't resolve the issue, the controller or capacitor may be defective, and you should contact your dealer.
General| Fuel type | Gasoline/oil mix |
|---|---|
| Motor type | Synchronous motor |
| Noise level | 90 dB |
| Cooling type | Air |
| Maximum power | 1200 W |
| Ignition system | - |
| Number of strokes | 2 |
| Fuel tank capacity | 4 L |
| Engine displacement | 63 cm³ |
| Castor wheels | No |
| Product color | Black, Red |
Weight and Dimensions| Weight | 18600 g |
|---|---|
| Package depth | 425 mm |
| Package width | 355 mm |
| Package height | 360 mm |
| Package weight | 19700 g |
Overview of the generator's physical components and their labels.
Lists all parts included in the product packaging.
Instructions on how to properly earth the generator for static discharge.
Step-by-step guide to start the generator's engine.
How to safely connect electrical appliances to the generator's output.
Procedure for safely shutting down the generator's engine.
Detailed instructions for cleaning the generator and servicing key components like air filter and spark plug.
General maintenance guidelines and procedures for the equipment.
Procedures for safely storing, restarting, and transporting the generator.
Information required when ordering spare parts for the generator.
