EINHELL TC-PG 1000 - Troubleshooting Guide

GB
- 20 -
9. Troubleshooting
Fault Mögliche Ursache Behebung
Engine does not
start
Automatic oil cut-out has not
responded
No fuel
Check the oil level, top up with engine
oil
Refuel
Generator has too
little or no
voltage
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air fi lter dirty
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the fi lter
Anl_TC_PG_1000_SPK1.indb 20Anl_TC_PG_1000_SPK1.indb 20 07.12.2016 08:43:3107.12.2016 08:43:31