EINHELL TC-SP 204 Operating Instructions

GB
- 19 -
OFF
ON
Overload switch
Caution! Risk of injury! Never reach into the planing knife during operation.
Danger! - Read the operating instructions to reduce the risk of injury
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
Anl_TC_SP_204_SPK9.indb 19 19.06.2023 08:46:40

EINHELL TC-SP 204 Specifications

General

Power	1500 W
Feed rate	6 m/min
Idle speed	9000 RPM
Dust extraction	Yes
AC input voltage	230-240 V
AC input frequency	50 Hz
Planning width (max)	204 mm
Dust adapter diameter	100 mm
Thickness opening (max)	120 mm
Parallel guide tilt angle (max)	45 °
Surface planing material removal (max)	3 mm
Thickness planing material removal (max)	2 mm

Weight and Dimensions

Weight	27200 g
Package depth	850 mm
Package width	425 mm
Package height	465 mm
Package weight	31150 g
Feed table dimensions (W x D)	370 x 210 mm
Thicknessing table dimensions (W x D)	270 x 210 mm