EINHELL TC-US 380 User Manual

GB
- 25 -
Ser vice information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts*
Consumables* Abrasive paper, grinding/sanding belt
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.Einhell-Service.com.
Please ensure that you provide a precise description of the problem and answer the following questions
in all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_US_380_SPK9.indb 25Anl_TC_US_380_SPK9.indb 25 19.10.2021 15:42:3719.10.2021 15:42:37

EINHELL TC-US 380 Specifications

General

Product type	Belt/disc sander
Grain sanding	P80
Mounting type	Bench-top
Adjustable angle	Yes
Sanding belt width	100 mm
Sanding belt length	914 mm
AC input voltage	230 - 240 V
AC input frequency	50 Hz

Weight and Dimensions

Weight	13250 g
Package depth	503 mm
Package width	269 mm
Package height	312 mm
Package weight	14590 g