To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-AG 18/115 Li Kit and is the answer not in the manual?
General| Disc diameter | 115 mm |
|---|---|
| Battery type | Li-ion |
| Weight | 1.6 kg |
| Spindle Thread | M14 |
| No-load speed | 8500 rpm |
| Idle Speed | 8500 rpm |
Emphasizes reading instructions to reduce risk of inquiry.
Advises wearing ear-muffs, masks, and goggles for safety.
Specifies guards for sanding/grinding and cutting/grinding.
Provides temperature and charge level requirements for battery storage.
Provides general safety information and warnings for power tools.
Details safety measures for the work area and environment.
Outlines precautions for electrical safety when using the tool.
Advises on maintaining focus, wearing PPE, and preventing accidental starts.
Covers avoiding overload, checking switches, and proper handling.
Provides guidelines for charging and using cordless tool batteries.
Stresses the importance of trained personnel and genuine spare parts for repairs.
Details safety precautions for handling, charging, and storing battery packs.
Explains how to connect the charger and information on the charging process.
Advises on protecting the tool and battery from moisture and extreme temperatures.
Contains extensive safety instructions covering tool usage, accessories, and personal protection.
Covers tool design, accessories, speed, size, and proper fit.
Details PPE, operator distance, cable management, and tool handling.
Covers ventilation, avoiding inflammable materials, and coolant use.
Additional safety points not covered in previous sections.
Explains recoil and provides precautions for safe handling and body positioning.
Covers guard usage, wheel selection, flanges, and wheel conditions.
Details safety for cutting wheels, avoiding blockage, and deep cuts.
Lists and identifies parts of the angle grinder as per Fig. 1.
Specifies the intended use for grinding metal and stone with appropriate guards.
Provides key technical data and specifications for the angle grinder.
Offers tips to keep noise and vibrations to a minimum during operation.
Highlights residual risks like lung damage, hearing loss, and vibration effects.
Advises on pre-operation checks and performing a test run for new wheels.
Step-by-step guide for charging the Li battery pack using the provided charger.
Explains how to operate the safety switch for turning the angle grinder on and off.
Details how to check the battery charge status using the LED indicator.
Instructions on how to safely change grinding wheels using the face spanner.
Describes correct flange arrangements for different types of grinding and cutting wheels.
Emphasizes the importance of keeping motor ventilation holes clean for proper operation.
Provides rules for selecting and using grinding and cutting wheels, including speed and rotation checks.
Details procedures for rough grinding and cutting applications.
Step-by-step instructions for cleaning the tool and its components.
Lists necessary information for ordering spare parts like type and article numbers.
Advises on proper disposal of the equipment and packaging according to local regulations.
Provides guidelines for storing the tool and accessories in a suitable environment.
Explains the meaning of LED indicators on the charger for different statuses like ready, charging, and faults.
