To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-CD 18/40 Li and is the answer not in the manual?
General| Power source | Battery |
|---|---|
| Charging time | 60 min |
| Battery voltage | 18 V |
| Battery capacity | 1.5 Ah |
| Torque (max) | 40 N⋅m |
| Number of gears | 2 |
| Torque settings | 21 |
| Idle speed (max) | 1500 RPM |
| Idle speed (min) | 400 RPM |
| Chuck capacity (max) | 13 mm |
| Drilling diameter in wood (max) | - mm |
| Chuck type | - |
| Product design | Pistol grip drill |
| Hammer drilling | No |
| Adjustable torque | Yes |
| Number of batteries included | 2 pc(s) |
| Product color | Black, Red, Silver |
Weight and Dimensions| Depth | 350 mm |
|---|---|
| Width | 100 mm |
| Height | 340 mm |
| Weight | 1500 g |
| Package weight | 3600 g |
Wear ear-muffs, breathing mask, and safety goggles for protection against hazards.
Keep area clean, well-lit; avoid explosive atmospheres; keep bystanders away.
Use correct plugs, avoid earthed surfaces, protect from moisture, and use extension cords.
Stay alert, use PPE, prevent unintentional starting, and maintain balance.
Hold by insulated surfaces, use appropriate drill bits, and manage pressure.
Covers battery charge, storage, lifespan, disposal, and general precautions.
Adjust torque setting ring when standstill; use 'Drill' setting for maximum torque.
Use changeover switch for rotation direction; On/Off switch controls variable speed.
Use center position for changeover switch; open chuck, insert tool, and tighten securely.
