To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-MG 200 CE and is the answer not in the manual?
General| Power | 200 W |
|---|---|
| Oscillation Angle | 2 x 1.5° |
| Weight | 1.5 kg |
| Sanding paper size | 93 x 93 x 93 mm |
| Power cable length | 2 m |
| Motor power | 200 W |
| Oscillation rate | 22000 - 40000 opm |
| No-load speed | 22000 min-1 |
Identifies the parts of the multifunction tool and accessories.
Lists components included in the package and checks for completeness.
Risk of lung damage due to dust exposure without proper mask.
Risk of hearing damage from noise exposure without ear protection.
Health risks from prolonged hand-arm vibration exposure without proper use.
Instructions for safely attaching various tools to the multifunction tool.
How to attach the triangular plate for delta sanding.
Methods for attaching sanding/grinding paper to the plate.
Steps to connect the dust extraction system for cleaner operation.
How to turn the multifunction tool on and off.
Advice for safe and effective use of the equipment.
Adjusting the operating speed using the speed controller.
Procedures for cleaning the equipment and its components.
Information on checking and replacing carbon brushes by a qualified electrician.
Notes on internal maintenance requirements for the equipment.
Information required when ordering replacement parts and accessories.
Lists parts subject to normal wear and tear requiring replacement.
Identifies parts that are consumed during normal use.
Notes regarding parts not included in the scope of delivery.
