To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-CD 18/45 3X-Li and is the answer not in the manual?
General| Battery Voltage | 18 V |
|---|---|
| Battery Type | Li-ion |
| Max Torque | 45 Nm |
| No-Load Speed (Gear 1) | 0-400 rpm |
| Chuck Type | Keyless chuck |
| Weight | 1.5 kg |
| Number of Gears | 2 |
| Torque Settings | 21 |
| Chuck Size | 13 mm |
| Drilling Capacity in Metal | 10 mm |
| No-Load Speed (Gear 2) | 0-1500 rpm |
General safety precautions to avoid injuries and damage when using the equipment.
Covers warnings for noise, dust, sparks, battery storage, and dry room use.
Describes the tool's purpose: tightening/undoing screws and drilling in wood, metal, and plastic.
States misuse or off-label use makes the manufacturer not liable for damages and voids warranty.
Highlights risks associated with sound and vibration, providing measured levels and warnings.
Emphasizes reading information, charging battery, using correct bits, and checking walls before use.
Critical safety warning to disconnect the battery before performing any cleaning.
