To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-MS 18/210 Li-Solo and is the answer not in the manual?
General| Blade diameter | 210 mm |
|---|---|
| Blade thickness | 1.8 mm |
| Battery included | No |
| Power source | Battery |
| Idle speed (max) | 3000 RPM |
| Sound power level | 104.2 dB |
| Sound pressure level | 91.2 dB |
| Sound level uncertainty | 3 dB |
| Product type | Standard miter saw |
| Angle setting range | 0 - 45 ° |
| Cutting depth (max) | 120 mm |
Weight and Dimensions| Weight | 7000 g |
|---|
Provides safety precautions for laser radiation, emphasizing not to look into the beam.
Lists and identifies all parts and components of the machine with reference to figures.
Details the list of items supplied with the cordless crosscut saw.
Defines the intended use of the saw and outlines potential hazards during operation.
Presents measured sound pressure and power levels, and vibration emissions according to standards.
Stresses the importance of wearing ear-muffs to prevent hearing damage from noise.
Covers securing the machine, ensuring blade freedom, and general pre-operation checks.
Details the process of attaching the transport handle and workpiece supports.
Explains how to set the turntable and machine head for precise angle adjustments.
Guides on setting the stop for precise 45-degree miter cuts using adjustment screws.
Describes how to adjust the miter angle on the machine head using the locking grip.
Provides step-by-step instructions for charging the Li battery pack using the charger.
Details the procedure for performing standard 90-degree crosscuts with the turntable at 0 degrees.
Explains how to make crosscuts with the turntable set at various angles (0-45 degrees).
Guides on performing miter cuts with the machine head angled and turntable at 0 degrees.
Details how to perform cuts with both the machine head and turntable angled simultaneously.
Explains how to adjust the screw to set the maximum cutting depth for precise cuts.
Describes the use and attachment of the sawdust bag for dust collection.
Provides instructions and safety precautions for replacing the saw blade using tools.
Outlines the steps for safely locking and transporting the machine using the handle.
Explains how to switch the laser guide on and off for precise cut alignment.
Details how to operate the integrated LED lamp for work area illumination.
Explains the function of the electric brake system for the saw blade and its implications.
Details how to clean the equipment and notes on maintenance, including carbon brushes.
Provides guidelines for environmentally friendly disposal of the equipment and packaging.
Specifies ideal conditions and location for storing the electric tool to maintain its condition.
Explains the meaning of different LED indicator lights on the battery charger for status and faults.
Information on service partners, wear parts, consumables, and ordering replacement parts.
Details the terms and conditions of the product warranty, including coverage, exclusions, and claim procedures.
States the product's conformity with relevant EU directives and standards.
