EN
- 8 -
Caution! Caution! Risk of injury! Do not reach into the running saw blade.
On/Off switch for laser
On/Off switch for LED lamp
Warning! To make miter cuts (with the saw head inclined or the turntable set at an angle), the
adjustable stop rail must be fi xed at an outer position.
To make 90° crosscuts, the adjustable stop rail must be fi xed at the inner position.
Anl_TE_MS_18_210_Li_SPK7_USA.indb 8Anl_TE_MS_18_210_Li_SPK7_USA.indb 8 05.08.2019 14:05:4905.08.2019 14:05:49
To Next Page
Loading...
