EINHELL TE-OS 2520 E Original Operating Instructions

GB
- 18 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TE_OS_2520_E_SPK1.indb 18Anl_TE_OS_2520_E_SPK1.indb 18 02.01.14 08:0402.01.14 08:04

EINHELL TE-OS 2520 E Specifications

General

Power	250 W
Soft grip	Yes
Type of sander	Orbital sander
Power source	AC
AC input voltage	230 V
Package weight	3700 g
Eccentricity	1 mm
Idle speed (max)	24000 RPM
Idle speed (min)	14000 RPM
Oscillating orbit diameter	2 mm

Weight and Dimensions

Depth	430 mm
Width	139 mm
Height	255 mm
Weight	2300 g
Sanding plate size (WxD)	230 x 115 mm