EINHELL TE-OS 2520 E User Manual

GB
- 20 -
Service information
We have competent service partners in all countries named on the guarantee certicate whose contact
details can also be found on the guarantee certicate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, grinding/sanding plate
Consumables* Grinding/sanding paper
Missing parts
* Not necessarily included in the scope of delivery!
In the eect of defects or faults, please register the problem on the internet at www.Einhell-Service.com.
Please ensure that you provide a precise description of the problem and answer the following questions
in all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TE_OS_2520_E_SPK9.indb 20Anl_TE_OS_2520_E_SPK9.indb 20 23.03.2022 08:58:3223.03.2022 08:58:32

EINHELL TE-OS 2520 E Specifications

General

Power	250 W
Soft grip	Yes
Type of sander	Orbital sander
Power source	AC
AC input voltage	230 V
Package weight	3700 g
Eccentricity	1 mm
Idle speed (max)	24000 RPM
Idle speed (min)	14000 RPM
Oscillating orbit diameter	2 mm

Weight and Dimensions

Depth	430 mm
Width	139 mm
Height	255 mm
Weight	2300 g
Sanding plate size (WxD)	230 x 115 mm