EINHELL TE-SM 36/210 Li - Solo - Page 27

GB
- 27 -
On/Off switch for laser
On/Off switch for LED lamp
Warning! To make miter cuts (with the saw head inclined or the turntable set at an angle), the adjustab-
le stop rail must be fi xed at an outer position.
To make 90° crosscuts, the adjustable stop rail must be fi xed at the inner position.
Store the batteries only in dry rooms with an ambient temperature of +10°C to +40°C.
Place only fully charged batteries in storage (charged at least 40%). (Not supplied)
Anl_TE_SM_36_210_Li_Solo_SPK9.indb 27Anl_TE_SM_36_210_Li_Solo_SPK9.indb 27 21.06.2019 12:37:1121.06.2019 12:37:11