To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-CS 190/1 and is the answer not in the manual?
Lists the components of the circular saw as shown in figures.
Details the contents of the packaging and what should be checked.
Provides sound and vibration measurement values according to EN 628415.
Explains how to adjust the cutting depth using the locking lever.
Describes how to adjust the angle setting for angled cuts.
Details precision adjustment of the miter stop to 0° or 90°.
Explains connecting a vacuum cleaner for dust extraction.
Describes using the parallel stop and line guide for precise cuts.
Provides instructions on how to operate the circular saw safely and effectively.
Details steps for using the circular saw, including connecting power and fitting blade.
Explains the procedure for switching the circular saw on and off.
Step-by-step guide on how to safely change the saw blade.
Instructions for cleaning the equipment after use.
Addresses carbon brushes and excessive sparking.
States that there are no internal parts requiring additional maintenance.
Lists information required for ordering spare parts.
General