EINHELL TE-CS 165 - User Manual

TE-CS 165
Art.-Nr.: 43.310.10 I.-Nr.: 11013
1
D Originalbetriebsanleitung
Handkreissäge
GB Original operating instructions
Hand-held circular saw
F Mode d’emploi d’origine
Scie circulaire portable
I Istruzioni per l’uso originali
Sega circolare a mano
DK/ Original betjeningsvejledning
N Håndrundsav
S Original-bruksanvisning
Handcirkelsåg
HR/ Originalne upute za uporabu
BIH Ručna kružna pila
RS Originalna uputstva za upotrebu
Ručna kružna testera
CZ Originální návod k obsluze
Ruční kotoučová pila
SK Originálny návod na obsluhu
Ručná okružná píla
Anl_TE_CS_165_SPK1.indb 1Anl_TE_CS_165_SPK1.indb 1 01.07.14 15:1601.07.14 15:16

EINHELL TE-CS 165 Specifications

General

Blade Diameter	165 mm
No-Load Speed	5000 rpm
Cutting Depth at 90°	55 mm
Weight	4.5 kg
Saw Blade Bore	20 mm
Mains Supply	230 V

Summary

Safety Regulations

Proper Use of the Saw

Technical Data

Technical Specifications

Before Starting the Equipment

Setting Cutting Depth

Step-by-step guide to adjust the saw blade depth for optimal cutting.

Miter Stop Adjustment

Instructions on how to set the angle for miter cuts.

Precision Miter Angle Setting

Fine-tuning the saw angle to precise 0° or 90° for accurate cuts.

Parallel Stop Usage

Line Guide for Cuts

Operation and Controls

Working with the Circular Saw

General safe operating practices and handling of the circular saw.

Preparing for Saw Operation

Switching the Saw On and Off

Saw Blade Replacement

Comprehensive guide on how to safely change the saw blade.

Maintenance and Replacement

Power Cable Safety and Replacement

Cleaning and Maintenance Procedures