EINHELL TE-SM 2534 Dual User Manual

TE-SM 2534 Dual
Art.-Nr.: 43.008.70 I.-Nr.: 11029
9
D Originalbetriebsanleitung
Zug-, Kapp- und Gehrungssäge
GB Original operating instructions
Drag, crosscut and miter saw
F Mode d’emploi d’origine
Scie à onglet radiale
I Istruzioni per l’uso originali
Sega a trazione per troncature e
tagli obliqui
DK/ Original betjeningsvejledning
N Skør,- kap- og geringssav
S Original-bruksanvisning
Drag-, kap- och geringssåg
NL Originele handleiding
Trek-, afkort- en verstekzaag
E Manual de instrucciones original
Sierra de tracción, oscilante y para
cortar ingletes
FIN Alkuperäiskäyttöohje
Veto-, katkaisu- ja jiirisaha
GR Πρωτότυπες Οδηγίες χρήσης
Φαλτσοπρίονο και πριόνι κάθετης
κοπής
Anl_TE_SM_2534_Dual_SPK9.indb 1 24.10.2019 12:03:04

EINHELL TE-SM 2534 Dual Specifications

General

Idle speed (max)	5100 RPM
Miter setting (left)	45 °
Input power	1800 W
Power source	AC
Cutting capacity 0°	340 mm
Cutting capacity 45° miter	180 x 47 mm
Blade diameter	250 mm
Dust bag included	Yes

Weight and Dimensions

Depth	901 mm
Width	614 mm
Height	361 mm
Weight	15650 g

Summary

Safety Regulations

Laser Safety Information

Caution: Laser radiation. Do not look into the beam. Laser class 2.

Product Layout and Components

Layout Diagram and Identification

Lists and identifies all the parts and components of the saw.

Items Supplied

Proper Use of the Saw

Technical Specifications

Sound and Vibration Levels

Before Starting Operation

General Setup Guidelines

Guidance on setting up the equipment securely and checking safety features.

Residual Risks and Precautions

Outlines potential hazards associated with the equipment's construction and layout.

Assembling the Saw Unit

Adjusting Miter Angle on Head

Precision Adjustment for 90° Crosscuts

Operating the Saw

Crosscuts at 90° (No Turntable Angle)

Guide for performing 90-degree crosscuts without turntable rotation.

Crosscuts at 90° (0°-45° Turntable Angle)

Instructions for 90-degree crosscuts with turntable angled from 0 to 45 degrees.

Miter Cuts (0°-45° Angle, 0° Turntable)

Procedure for miter cuts at 0-45 degrees with the turntable set at 0 degrees.

Miter Cuts (0°-45° Angle, 0°-45° Turntable)

Limiting Cutting Depth

Changing the Saw Blade Safely

Power Cable Replacement

Cleaning, Maintenance, and Parts

Equipment Cleaning Procedures

Detailed instructions for cleaning the equipment.

Ordering Replacement Parts

Information on what data to provide when ordering spare parts.

Disposal and Recycling Guidelines

Service and Support Information

Product Warranty Certificate