EINHELL TE-SM 2534 Dual User Manual

GB
- 29 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TE_SM_2534_Dual_SPK9.indb 29 24.10.2019 12:03:42

EINHELL TE-SM 2534 Dual Specifications

General

Idle speed (max)	5100 RPM
Miter setting (left)	45 °
Input power	1800 W
Power source	AC
Cutting capacity 0°	340 mm
Cutting capacity 45° miter	180 x 47 mm
Blade diameter	250 mm
Dust bag included	Yes

Weight and Dimensions

Depth	901 mm
Width	614 mm
Height	361 mm
Weight	15650 g