To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-SM 2534 Dual and is the answer not in the manual?
General| Power | 2000 W |
|---|---|
| Blade Diameter | 250 mm |
| Saw blade bore | 30 mm |
| Swivel range | 0° - 45° |
| Cutting width 90° x 90° | 340 mm |
| Cutting width 90° x 45° | 240 mm |
| Max. cutting width | 340 mm |
| Max cutting depth at 90° | 75 mm |
| Mitre cut | 45° left / 45° right |
| Mains supply | 230 V |
| No-load speed | 5000 min^-1 |
Read instructions to reduce risk of inquiry.
Use ear-muffs, mask, goggles, and gloves for protection.
Do not reach into the running saw blade to avoid injury.
Maintain clean work area, proper lighting, avoid electric shock, and keep children away.
Follow practices for operation, maintenance, checks, and dust extraction.
Adhere to safe practices during cutting operations and follow additional safety guidelines.
Store tools properly, use as intended, dress safely, and secure workpieces.
