To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-SM 216 and is the answer not in the manual?
General| Blade bore | 30 mm |
|---|---|
| Blade diameter | 216 mm |
| Saw blade included | Yes |
| Number of blade teeth | 48 |
| Input power | 1500 W |
| Power source | AC |
| AC input voltage | 220 -240 V |
| AC input frequency | 50 Hz |
| Idle speed (max) | 5200 RPM |
| Cutting width (90°) | 305 mm |
| Sliding rails | - |
Weight and Dimensions| Depth | 790 mm |
|---|---|
| Width | 460 mm |
| Height | 380 mm |
| Weight | 12740 g |
| Package weight | 14840 g |
Essential safety guidelines, including personal protective equipment and operational warnings.
Detailed diagram and list of all parts included with the saw.
Lists all components included in the product packaging.
Defines the intended purpose of the saw and outlines potential risks.
Detailed specifications for the TC-SM 216 model, including power and dimensions.
Detailed specifications for the TC-SM 254 model, including power and dimensions.
Information on measured noise emission values and required hearing protection.
Guidelines for securely positioning and preparing the equipment before use.
Instructions for assembling key components like workpiece supports and sawdust bag.
Steps for adjusting turntable, stop rails, and angle stops for precise cuts.
Steps for accurately setting stop rails and angle stops for precise cuts.
Guides on performing 90-degree crosscuts and angled miter cuts.
How to set and adjust the cutting depth limiter for specific tasks.
Step-by-step guide for safely replacing the saw blade.
Instructions on how to use the laser for accurate cutting guidance.
Procedures for safely securing and transporting the equipment.
Safety warnings and procedures for replacing a damaged power cable.
Guidelines for cleaning the saw and performing routine maintenance.
Information required and how to order replacement parts and accessories.
Instructions for environmentally friendly disposal of the equipment and packaging.
Recommendations for storing the tool and accessories safely.
Special conditions for connecting the product to the power supply.
Details on service partners and how to report product defects.
Explains the terms, conditions, and duration of the product warranty.
