EINHELL TC-MS 216 - User Manual


  
9
  
!"" #$% &
$' (" )(
() #*+
,  )(#-(
).(
  /("- ((
"() (0 
!1 232#
 !"(3
  43
!"()%5
6 7873(#4( /
!"(3)8"
! 7973(#( % 
!"(3)"8
: %##
;4(34/
<  # ))((
()9")(

, 4 "&4&9=(%2
!4 22%
: 3(#/ "((
>/2>
? <#%/7 87
,2/ @4A; @/
B  )  # /(
,  #/
$B

EINHELL TC-MS 216 Specifications

General

Input power	- W
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Idle speed (max)	5000 RPM
Cutting width (90°)	120 mm
Blade diameter	216 mm
Saw blade included	-

Weight and Dimensions

Depth	535 mm
Width	364 mm
Height	330 mm
Weight	8270 g
Package width	9800 mm

Summary

1. Safety regulations

2. Layout and items supplied

2.1 Layout (Fig. 1-15)

Illustrates the different parts and controls of the machine.

2.2 Items supplied

Lists all the components and accessories provided with the saw.

3. Proper use

4. Technical data

Danger! Noise

Details noise emission levels and associated hearing risks.

5. Before starting the equipment

5.1 General information

General guidelines for setting up and preparing the equipment before use.

5.2 Assembling the saw (Fig. 2, 3, 6)

Instructions for assembling the saw components and attaching accessories.

5.3 Adjusting the saw (Fig. 1;2)

Details on how to adjust the machine head and turntable for various cuts.

5.4 Precision adjustment of the stop rail (Fig. 8-10)

Steps for precisely adjusting the adjustable stop rail for accurate cuts.

5.5 Precision adjustment of the angle stop for crosscut 90° (Fig. 9, 11)

How to precisely set the angle stop for 90-degree crosscuts.

5.6 Precision adjustment of the angle stop for miter cut 45° (Fig. 10, 12)

How to precisely set the angle stop for 45-degree miter cuts.

6. Operation

6.1 Crosscut 90° and turntable 0° (Fig. 1)

Procedure for performing 90-degree crosscuts with the turntable at 0 degrees.

6.2 Crosscut 90° and turntable 0°-45° (Fig. 13)

How to make 90-degree crosscuts with the turntable set between 0 and 45 degrees.

6.3 Miter cut 0°-45° and turntable 0° (Fig. 14)

Instructions for making miter cuts at 0-45 degrees with the turntable at 0 degrees.

6.4 Miter cut 0°-45° and turntable 0°-45° (Fig. 15)

Procedure for making double miter cuts (0-45 degrees).

6.5 Sawdust bag (Fig. 2)

Information on using and emptying the sawdust bag.

6.6 Changing the saw blade (Fig. 4-7)

Step-by-step guide for safely replacing the saw blade.

7. Replacing the power cable

8. Cleaning, maintenance and ordering of spare parts

8.1 Cleaning

Guidance on how to clean the equipment to keep it in good condition.

8.2 Carbon brushes

Information regarding carbon brushes, their inspection, and replacement.

8.3 Maintenance

Details on routine maintenance and lubrication of moving parts.

8.4 Ordering spare parts and accessories

Information required when ordering spare parts and accessories.

8.5 Transport

Tips and precautions for safely transporting the machine.

9. Disposal and recycling

10. Storage

Service information

Warranty certificate