Need help?Do you have a question about the EINHELL TC-SS 405 E and is the answer not in the manual?
General| Maximum power | 120 W |
|---|---|
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Blade length | 127 mm |
| Throat depth | 406 mm |
| Product color | Black, Grey, Red |
| Stroke height | 14 mm |
| Idle speed (max) | 1600 RPM |
| Idle speed (min) | 400 RPM |
| Cutting height @ 45° | 20 mm |
| Cutting height @ 90° | 52 mm |
Weight and Dimensions| Weight | 12500 g |
|---|---|
| Table depth | 250 mm |
| Table width | 408 mm |
| Package depth | 644 mm |
| Package width | 316 mm |
| Package height | 330 mm |
| Package weight | 13450 g |
Describes the layout of the fretsaw and its components with numbered figures.
Lists the items included in the product packaging and instructions for checking completeness.
Outlines general precautions and checks before operating the machine.
Provides instructions and cautions for assembling or preparing the fretsaw for use.
Offers important notes and tips for operating the saw, including guidance and blade handling.
Details how to use the power switch and the safety feature.
Explains how to adjust the blade speed for different materials.
Describes the process of performing internal cuts on a panel without external damage.
Provides instructions for cleaning the equipment, including safety advice and cleaning agents.
Advises on checking and replacing carbon brushes by a qualified electrician due to sparking.
States that there are no internal parts requiring additional maintenance.
Lists the information needed to order replacement parts and where to find it.
To Next Page
