EINHELL TC-SM 2534/1 Dual - User Manual

TC-SM 2534/1 Dual
Art.-Nr.: 43.003.95 I.-Nr.: 11019
9
D Originalbetriebsanleitung
Zug-, Kapp- und Gehrungssäge
GB Original operating instructions
Drag, crosscut and miter saw
F Instructions d’origine
Scie à onglet radiale
I Istruzioni per l’uso originali
Sega a trazione per troncature e
tagli obliqui
S Original-bruksanvisning
Drag-, kap- och geringssåg
CZ Originální návod k obsluze
Kapovací a pokosová pila s
pojezdem
SK Originálny návod na obsluhu
Tesárska, kapovacia a pokosová
píla
NL Originele handleiding
Trek-, afkort- en verstekzaag
E Manual de instrucciones original
Sierra de tracción, oscilante y para
cortar ingletes
FIN Alkuperäiskäyttöohje
Veto-, katkaisu- ja jiirisaha
H Eredeti használati utasítás
Vonó-, fejező- és sarkaló fűrész
GR Πρωτότυπες Οδηγίες χρήσης
Φαλτσοπρίονο και πριόνι κάθετης
κοπής
Anl_TC_SM_2534_1_Dual_SPK9.indb 1Anl_TC_SM_2534_1_Dual_SPK9.indb 1 10.12.2019 13:22:3510.12.2019 13:22:35

EINHELL TC-SM 2534/1 Dual Specifications

General

Input power	2350 W
Power source	AC
AC input voltage	230-240 V
AC input frequency	50 Hz
Idle speed (max)	4000 RPM
Cutting width (90°)	340 mm
Miter setting (left)	-45 °
Miter setting (right)	45 °
Blade bore	30 mm
Blade diameter	250 mm
Saw blade included	-
Number of blade teeth	48
Dust extraction	Yes

Weight and Dimensions

Weight	14300 g
Package depth	575 mm
Package width	795 mm
Package height	460 mm
Package weight	19350 g

Summary

1. Safety Regulations

General Safety Information

General warnings and precautions to ensure safe operation and prevent injuries.

Special Information About the Laser

Specific safety instructions and warnings related to the laser device.

3. Proper Use

5. Before Starting the Equipment

5.1 General Information

5.2 Assembling the Saw (Fig. 1-5)

5.3 Adjusting the Saw (Fig. 1-3)

5.4 Precision Adjustment of the Stop Rail (Fig. 6)

5.5 Precision Adjustment of the Stop for Crosscut 90° (Fig. 7 a, 8)

5.6 Precision Adjustment of the Stop for Miter Cut 45° (Fig. 7, 9)

6. Operation

6.1 Cross Cut 90° and Turntable 0° (Fig. 1-3, 11)

Detailed steps for performing 90-degree crosscuts with the turntable at 0 degrees.

6.2 Cross Cut 90° and Turntable 0° - 45° (Fig. 1-3, 12)

Instructions for 90-degree crosscuts with turntable angled from 0 to 45 degrees.

6.3 Miter Cut 0°-45° and Turntable 0° (Fig. 1-3, 13)

Procedure for making miter cuts with the turntable at 0 degrees.

6.4 Miter Cut 0°-45° and Turntable 0°-45° (Fig. 1-3, 14)

Guide for performing double miter cuts with angled turntable and head.

6.5 Limiting the Cutting Depth (Fig. 15)

6.7 Replacing the Saw Blade (Fig. 1, 16)

Step-by-step instructions for safely replacing the saw blade.

6.9 Operating the Laser (Fig. 1, 17)

7. Replacing the Power Cable

8. Cleaning, Maintenance and Ordering of Spare Parts

8.1 Cleaning

8.2 Carbon Brushes

Service Information

Warranty Certificate