EINHELL TC-SM 2131/1 Dual User Manual

TC-SM 2131/1 Dual
Art.-Nr.: 43.003.90 I.-Nr.: 11019
9
D Originalbetriebsanleitung
Zug-, Kapp- und Gehrungssäge
GB Original operating instructions
Drag, crosscut and miter saw
F Instructions d’origine
Scie à onglet radiale
I Istruzioni per l’uso originali
Sega a trazione per troncature e
tagli obliqui
DK/ Original betjeningsvejledning
N Skør,- kap- og geringssav
S Original-bruksanvisning
Drag-, kap- och geringssåg
CZ Originální návod k obsluze
Kapovací a pokosová pila s
pojezdem
SK Originálny návod na obsluhu
Tesárska, kapovacia a pokosová
píla
NL Originele handleiding
Trek-, afkort- en verstekzaag
E Manual de instrucciones original
Sierra de tracción, oscilante y para
cortar ingletes
FIN Alkuperäiskäyttöohje
Veto-, katkaisu- ja jiirisaha
SLO Originalna navodila za uporabo
Dvoročna žaga, čelilna žaga in
zajeralna žaga
H Eredeti használati utasítás
Vonó-, fejező- és sarkaló fűrész
GR Πρωτότυπες Οδηγίες χρήσης
Φαλτσοπρίονο και πριόνι κάθετης
κοπής
Anl_TC_SM_2131_1_Dual_SPK9.indb 1Anl_TC_SM_2131_1_Dual_SPK9.indb 1 21.10.2019 09:46:4421.10.2019 09:46:44

EINHELL TC-SM 2131/1 Dual Specifications

General

Sliding rails	Yes
Stand material	-
Maximum capacity	- mm
Maximum weight capacity	- kg
Number of blade teeth	48
Input power	1500 W
Power source	AC
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Idle speed (max)	4900 RPM
Miter setting (left)	45 °

Weight and Dimensions

Weight	11000 g
Package depth	455 mm
Package width	717 mm
Package height	393 mm
Package weight	14200 g

Summary

Safety Precautions and Personal Protection

General Safety Guidelines

Adhere to operating instructions to minimize risks and ensure safe use of the equipment.

Personal Protective Equipment (PPE)

Mandatory use of ear protection, breathing masks, and safety goggles for user safety.

Laser Safety Information and Operation

Laser Radiation Hazard Warning

Critical warning about laser radiation; never look directly into the beam.

Proper Use and Application Scope

Intended Saw Application

Specifies the saw's use for cross-cutting wood and its limitations.

Equipment Setup and Adjustment Procedures

Saw Assembly and Basic Adjustments

Operating Procedures: Cutting Types

Standard Crosscut Operations

Instructions for performing 90° crosscuts with and without drag function.

Miter and Compound Cutting

Guides for making 0°-45° miter cuts and double miter cuts.

Saw Blade Maintenance and Replacement

Saw Blade Replacement Process

Detailed steps for safely replacing the saw blade, including safety guards.