EINHELL TC-SB 200 - User Manual

TC-SB 200
Art.-Nr.: 43.080.15 I.-Nr.: 11024
1
D Originalbetriebsanleitung
Bandsäge
GB Original operating instructions
Band Saw
F Mode d’emploi d’origine
Scie à ruban
I Istruzioni per l’uso originali
Sega a nastro
DK/ Original betjeningsvejledning
N Båndsav
S Original-bruksanvisning
Bandsåg
HR/ Originalne upute za uporabu
BIH Tračna pila
RS Originalna uputstva za upotrebu
Trakasta testera
CZ Originální návod k obsluze
Pásová pila
SK Originálny návod na obsluhu
Pásová pila
Anl_TC_SB_200_SPK1.indb 1Anl_TC_SB_200_SPK1.indb 1 13.11.14 14:3713.11.14 14:37

EINHELL TC-SB 200 Specifications

General

Brand	EINHELL
Model	TC-SB 200
Category	Saw
Language	English

Summary

Safety Instructions

General Safety Precautions

Essential safety advice regarding operation and potential hazards.

Blade Handling and Housing Safety

Instructions for safe blade interaction and housing cover usage.

Usage, Specifications, and Safety Data

Proper Use of the Bandsaw

Assembly and Setup Part 1

Pre-Operation Checks

Steps to take before operating the bandsaw for the first time.

Mounting Saw Table and Blade Tensioning

Instructions for attaching the saw table and setting blade tension.

Assembly and Setup Part 2

Blade and Guide Adjustments

Procedures for adjusting the blade, guides, and support bearings.

Adjusting the Upper Blade Guide

Operation and Transport

General Operation Guidelines

Key operational advice and safety measures during use.

Cutting Procedures

Step-by-step guides for various cutting methods.

Safe Transport of the Bandsaw

Warranty and Compliance

Warranty Provisions Overview