To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-TS 200 and is the answer not in the manual?
General| Input power | 800 W |
|---|---|
| AC input voltage | 230-240 V |
| AC input frequency | 50 Hz |
| Idle speed | 2950 RPM |
| Cutting depth (45º) | 27 mm |
| Cutting depth (90º) | 45 mm |
| Number of teeth | 24 |
| Saw blade included | - |
| Package depth | 510 mm |
| Package width | 540 mm |
| Package height | 360 mm |
| Package weight | 13600 g |
| Product color | Black, Red, Stainless steel |
Weight and Dimensions| Weight | 11000 g |
|---|---|
| Table depth | 373 mm |
| Table width | 505 mm |
| Bore diameter | 16 mm |
| Blade diameter | 200 mm |
Essential safety rules to prevent injuries and damage during operation and handling.
Details on the intended applications and restrictions for the bench-type circular saw.
Essential checks to perform before connecting power and starting the saw for the first time.
Guide to safely fitting and changing the saw blade.
Setting stop height and cut width for longitudinal cuts using the parallel stop.
Adjusting the saw blade tilt angle for performing bevel cuts.
Detailed steps for performing longitudinal (slitting) cuts on workpieces along the grain.
Specific instructions for making longitudinal cuts on narrow workpieces using a push stick.
Safety guidelines and procedure for replacing a damaged power cable on the equipment.
