Need help?Do you have a question about the EINHELL TC-TS 2225 U and is the answer not in the manual?
General| Product color | Red, Silver |
|---|---|
| Quick stop function | Yes |
| Idle speed | 4250 RPM |
| Cutting height @ 45° | 55 mm |
| Cutting height @ 90° | 80 mm |
| Cross stop tilt angle range | -45 - 45 ° |
| Input power | 1800 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Saw blade type | Single |
| Number of teeth | 48 |
| Number of saw blades | 1 |
| Package depth | 615 mm |
| Package width | 715 mm |
| Package weight | 28600 g |
Weight and Dimensions| Depth | 750 mm |
|---|---|
| Width | 610 mm |
| Height | 380 mm |
| Weight | 17460 g |
| Table depth | 555 mm |
| Table width | 580 mm |
| Bore diameter | 30 mm |
| Blade diameter | 254 mm |
| Height adjustment range | 0 - 80 mm |
Guidelines for maintaining a safe work environment and avoiding hazards.
Precautions for safe use of electrical components and connections.
Measures for personal safety and responsible operation of the tool.
Best practices for operating the tool safely, including posture and clothing.
Ensuring safety guards are fitted and following rules for safe sawing operations.
Critical safety rules for performing sawing operations to prevent injuries.
Precautions for operating the bench-type circular saw safely and additional blade safety.
Further safety guidelines regarding saw blades and accessories.
Overview of the saw's components and their identification numbers.
Verification of supplied parts and inspection for transport damage.
Details on the saw's intended applications and prohibited uses.
Key technical data including motor, dimensions, weight, and power.
Pre-operation checks and safety warnings before connecting to power.
Step-by-step guide for constructing the saw's base frame and legs.
Attaching table extensions and safely setting up the saw.
Procedures for changing the table insert and fitting the splitter/guard.
Detailed steps for safely replacing the saw blade.
How to connect a dust extractor or vacuum cleaner for dust management.
Operation of the power switch and adjustment of cutting depth.
Guide on using the parallel stop for longitudinal cuts and setting its height.
Adjusting the stop rail and using the cross stop for various cuts.
Adjusting the saw blade angle and extending the table width for different cuts.
Step-by-step guide for performing longitudinal cuts along the wood grain.
Instructions for narrow workpiece, bevel, and cross cuts.
Instructions for cleaning the saw and replacing a damaged power cable.
Information on ordering parts, carbon brushes, and proper storage.
Guidelines for environmentally friendly disposal of the equipment and packaging.
Details on warranty coverage, limitations, and claim procedures.
Manufacturer's statement of compliance with relevant EU directives and standards.
To Next Page