To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-TS 254 eco and is the answer not in the manual?
General| Input power | 2050 W |
|---|---|
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Idle speed | 4250 RPM |
| Cutting height @ 45° | 55 mm |
| Cutting height @ 90° | 80 mm |
| Number of teeth | 24 |
| Saw blade included | Yes |
| Product color | Black, Red |
| Package weight | 20320 g |
Weight and Dimensions| Depth | 680 mm |
|---|---|
| Width | 605 mm |
| Height | 340 mm |
| Weight | 16990 g |
| Table depth | 555 mm |
| Table width | 580 mm |
| Blade diameter | 254 mm |
| Blade thickness | 30 mm |
| Height adjustment range | 0 - 80 mm |
Highlights critical safety warnings, including reading instructions, wearing protective gear, and avoiding hazards.
Advises on keeping the operating manual safe and accessible for reference and potential transfer to new users.
Provides a detailed list and visual references for identifying all parts and components of the bench-type circular saw.
Guides users on how to verify the completeness of the delivered package and report any missing items promptly.
Details the saw's intended use for wood cutting and warns against improper applications, hazards, and commercial use.
Specifies approved saw blade types (HM, CV) and prohibits the use of HSS blades and cutting-off wheels for safe operation.
Details noise levels, emphasizes ear protection, and provides tips for minimizing noise and vibrations during operation.
Outlines essential checks like mains data compatibility and safety precautions, including unplugging before adjustments.
Guides on assembling the base frame, positioning the saw unit upright, and securing components for stability.
Details installing splitter/guard, replacing table insert, changing saw blade, and storing accessories securely.
Explains power switch use, adjusting cutting depth, and setting saw blade angle for various cutting tasks.
Guides on using the parallel stop for longitudinal cuts and the cross stop for cross cuts, including angle adjustments.
Details performing longitudinal, bevel, and cross cuts, emphasizing workpiece guidance and safety precautions.
Covers power cable replacement safety and procedures for servicing carbon brushes, requiring qualified personnel.
Provides cleaning instructions and guidance on ordering spare parts and accessories, specifying necessary details.
Explains how to properly dispose of the equipment and packaging materials according to environmental regulations.
Provides guidelines for storing the equipment in a dark, dry place at suitable temperatures to maintain its condition.
Provides information on finding service partners, identifying consumable parts, and reporting equipment defects.
Details warranty terms, covered defects, exclusions, guarantee period, and the procedure for submitting a warranty claim.
