Do you have a question about the EINHELL TC-TS 254 U and is the answer not in the manual?
Assemble the base frame using the provided legs and cross struts.
Attach the table width extensions to the saw table and base frame.
Position the assembled saw upright and secure all connections.
Instructions for attaching or detaching the splitter and saw blade guard.
Detailed steps for safely replacing the saw blade.
Instructions for using and adjusting the parallel stop for cuts.
Using the cross stop for making cross cuts.
Procedure for adjusting the saw blade's bevel angle.
Assemble the base frame using the provided legs and cross struts.
Attach the table width extensions to the saw table and base frame.
Position the assembled saw upright and secure all connections.
Instructions for attaching or detaching the splitter and saw blade guard.
Detailed steps for safely replacing the saw blade.
Instructions for using and adjusting the parallel stop for cuts.
Using the cross stop for making cross cuts.
Procedure for adjusting the saw blade's bevel angle.
| Idle speed | 4250 RPM |
|---|---|
| Cutting depth (45º) | 55 mm |
| Cutting depth (90º) | 80 mm |
| Package depth | 380 mm |
| Package width | 615 mm |
| Package height | 750 mm |
| Package weight | 25800 g |
| Number of teeth | 24 |
| Saw blade included | Yes |
| Product color | Black, Red |
| Placement supported | Freestanding |
| Input power | 2200 W |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Height | 870 mm |
|---|---|
| Weight | 21865 g |
| Table depth | 555 mm |
| Table width | 580 mm |
| Height adjustment range | 0 - 80 mm |












Loading...