To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-TS 210 and is the answer not in the manual?
General| Idle speed | 4800 RPM |
|---|---|
| Cutting height @ 45° | 27 mm |
| Cutting height @ 90° | 45 mm |
| Input power | 1200 W |
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Number of teeth | 24 |
| Saw blade included | Yes |
| Protection class | II |
| Package weight | 13500 g |
Weight and Dimensions| Depth | 562 mm |
|---|---|
| Width | 477 mm |
| Height | 390 mm |
| Weight | 11300 g |
| Table depth | 440 mm |
| Table width | 525 mm |
| Blade diameter | 210 mm |
| Blade thickness | 2.6 mm |
| Height adjustment range | 0 - 45 mm |
Key safety warnings and essential reading before operating the equipment.
Identifies all parts and their location on the saw and accessories.
Lists all accessories and parts provided with the equipment.
Describes correct usage, potential hazards, and specific warnings like noise.
Provides detailed technical specifications of the bench-type circular saw.
Details the measured noise levels and associated uncertainties.
Outlines essential checks, warnings, and initial steps before operating the saw.
Highlights critical safety instructions to follow during assembly and maintenance.
Step-by-step guide for fitting and removing the saw blade guard.
Instructions for replacing the table insert and fitting/removing the splitter.
Detailed steps for safely fitting and changing the saw blade.
Guides for connecting sawdust extraction.
Instructions for storing loose parts when not in use.
Explains the on/off switch, overload protection, and cutting depth adjustment.
Details the setup and use of parallel and cross stops for various cuts.
Describes how to adjust and set the saw blade angle for bevel cuts.
Provides instructions for longitudinal, angular, and cross cuts.
Details the procedure and safety warnings for replacing the equipment's power cable.
Instructions for cleaning the equipment, including safety precautions.
Guidance on checking and maintaining carbon brushes, with safety warnings.
Covers scheduled maintenance, ordering spare parts, and accessories.
Provides guidance on equipment transport, environmental disposal, and storage conditions.
Lists parts subject to wear and required consumables for the product.
Guides users on how to report issues and provide necessary information for service.
Details the warranty coverage, limitations, and validity period for the product.
Explains the process for submitting a claim and what proof is required.
Lists the EU directives and harmonized standards the product complies with.
