Do you have a question about the EINHELL TC-TS 2025 U and is the answer not in the manual?
Power | 2000 W |
---|---|
Blade diameter | 250 mm |
Max cutting depth at 90° | 85 mm |
Max cutting depth at 45° | 60 mm |
Table size | 640 x 487 mm |
Number of saw teeth | 48 |
Swivelling range of saw blade | 0° - 45° |
Height adjustment | 0 - 85 mm |
Diameter of suction adapter | 36 mm |
Working height | 830 mm |
No-load speed | 5000 rpm |
Overview of product components and their identification numbers.
List of parts included in the product packaging.
Detailed technical specifications for the TC-TS 2025 U model.
Detailed technical specifications for the TC-TS 2025 eco model.
Important checks and safety advisories before operating the saw.
Step-by-step guide for assembling the main support structure of the saw.
Instructions for attaching the table width extension component.
Procedure for installing or removing the safety guard for the saw blade.
Steps to replace the table insert, often done for wear or damage.
Instructions for adjusting the splitter for safe cutting operations.
Guide on how to install or change the saw blade.
How to turn the saw on and off using the main switch.
Procedure for setting the desired depth of cut for the saw blade.
Guide on using the parallel stop for longitudinal cuts and adjustments.
Instructions for using the cross stop for making cross cuts at various angles.
How to adjust the saw blade to cut at different angles (bevel cuts).
Detailed steps for performing straight cuts along the grain of wood.
Guidance on safely cutting narrow pieces of wood using a push stick.
Specific instructions for cutting very thin workpieces safely.
How to perform angled cuts using the saw.
Procedure for cutting wood across the grain.
Instructions for keeping the saw clean and free of debris.
Information regarding carbon brushes and when to check them.
Details on internal maintenance requirements for the equipment.
How to order replacement parts and additional accessories.