EINHELL TC-TS 2025 - User Manual

TC-TS 2025/2 eco
Art.-Nr.: 43.405.30 I.-Nr.: 11037
9
D Originalbetriebsanleitung
Tischkreissäge
GB Original operating instructions
Bench-type circular saw
F Instructions d’origine
Scie circulaire à table
I Istruzioni per l’uso originali
Sega circolare da banco
DK/ Original betjeningsvejledning
N Bordrundsav
S Original-bruksanvisning
Bordscirkelsåg
CZ Originální návod k obsluze
Stolní kotoučová pila
SK Originálny návod na obsluhu
Stolná kotúčová píla
NL Originele handleiding
Tafelcirkelzaag
E Manual de instrucciones original
Sierra circular de mesa
FIN Alkuperäiskäyttöohje
Pöytäsirkkeli
SLO Originalna navodila za uporabo
Namizna krožna žaga
H Eredeti használati utasítás
Asztalikörfűrész
RO Instrucţiuni de utilizare originale
Ferăstrău circular cu masă
GR Πρωτότυπες Οδηγίες χρήσης
Δισκοπρίονο πάγκου
Anl_TC_TS_2025_2_ECO_SPK9.indb 1Anl_TC_TS_2025_2_ECO_SPK9.indb 1 18.12.2017 08:45:4518.12.2017 08:45:45
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Einhell TC-TS 2025
TC-TS 2025/2 eco o cerca il tuo prodotto tra le migliori offerte di Elettroutensili

EINHELL TC-TS 2025 Specifications

General

Power	2000 W
Blade Diameter	250 mm
Cutting Height at 90°	85 mm
Cutting Height at 45°	65 mm
Table Size	640 x 487 mm
Number of Saw Teeth	24
Swivelling Range of Saw Blade	0° - 45°
Max. Cutting Height at 45°	65 mm
Diameter of Suction Adapter	36 mm
Working Height	850 mm
No-load Speed	5000 rpm
Idle Speed	5000 rpm

Summary

Safety Warnings

Health and Safety Precautions

Covers warnings for hearing, breathing, eye protection, and risk of injury.

Risk of Injury Warnings

Highlights the danger of reaching into the running saw blade.

1. Safety Regulations

3. Proper Use

4. Technical Data

5. Before Starting the Equipment

6. Assembly

6.1 Assembling the Base Frame

Instructions for assembling the base frame and attaching legs and struts.

7. Using the Saw

7.3 Parallel Stop

Instructions for setting and using the parallel cutting guide.

7.4 Cross Stop

8. Operation

8.1.1 Making Longitudinal Cuts

Guidance for performing slitting operations along the grain.

8.1.4 Making Bevel Cuts

8.1.5 Making Cross Cuts

Procedure for making cuts across the grain using the cross stop.

9. Replacing the Power Cable

10. Cleaning, Maintenance and Ordering Spare Parts