EINHELL TC-TS 210 User Manual

GB
- 29 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TC_TS_210_SPK9.indb 29Anl_TC_TS_210_SPK9.indb 29 07.11.2019 08:49:3207.11.2019 08:49:32

EINHELL TC-TS 210 Specifications

General

Idle speed	4800 RPM
Cutting height @ 45°	27 mm
Cutting height @ 90°	45 mm
Input power	1200 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Number of teeth	24
Saw blade included	Yes
Protection class	II
Package weight	13500 g

Weight and Dimensions

Depth	562 mm
Width	477 mm
Height	390 mm
Weight	11300 g
Table depth	440 mm
Table width	525 mm
Blade diameter	210 mm
Blade thickness	2.6 mm
Height adjustment range	0 - 45 mm