EINHELL TC-TS 210 User Manual

GB
- 30 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* V-belt, carbon brushes, table insert, push stick
Consumables* Saw blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_TS_210_SPK9.indb 30Anl_TC_TS_210_SPK9.indb 30 07.11.2019 08:49:3207.11.2019 08:49:32

EINHELL TC-TS 210 Specifications

General

Idle speed	4800 RPM
Cutting height @ 45°	27 mm
Cutting height @ 90°	45 mm
Input power	1200 W
AC input voltage	220-240 V
AC input frequency	50 Hz
Number of teeth	24
Saw blade included	Yes
Protection class	II
Package weight	13500 g

Weight and Dimensions

Depth	562 mm
Width	477 mm
Height	390 mm
Weight	11300 g
Table depth	440 mm
Table width	525 mm
Blade diameter	210 mm
Blade thickness	2.6 mm
Height adjustment range	0 - 45 mm