EINHELL TC-TS 2225 U User Manual

GB
- 77 -
6.7 Putting away loose parts (Fig. 15)
•
When not in use, the parallel stop (7), push stick (3) and the two
wrenches (38+39) can be secured as shown in Fig. 15a.
•
The cross stop (14) can be secured as shown in Fig. 15b.
6.8 Connection for dust extractor (Fig. 2, 26)
A connection for a dust extractor is provided on the extractor adap-
ter on the housing (16) and on the saw blade guard (2).
6.8.1 Dust extraction using a wet & dry vac (Fig. 2):
•
A wet & dry vac is not supplied with the product and is available
as an accessory.
•
Connect the wet & dry vac to the extractor adapter on the
housing (16).
6.8.2 Dust extraction using a vacuum extraction system and
extractor adapter set (Fig. 26):
•
The product is not supplied with an extractor adapter set with
suction hose (a) and adapter (b) or a vacuum extraction system,
which are available as accessories.
•
Using a crosstip screwdriver, undo the screw on the cap (36) on
the saw blade guard (2).
•
The the cap (36) from the saw blade guard (2).
•
Connect the adapter (b) to the extractor adapter on the housing
(16).
•
Connect the saw blade guard (2) and the adapter (b) to the suc-
tion hose (a).
•
A vacuum extraction system can now be connected to the 100
mm diameter of the adapter (b).
Anl_TC_TS_2225_U_SPK7_Rewe.indb 77 24.03.2020 10:29:26

EINHELL TC-TS 2225 U Specifications

General

Product color	Red, Silver
Quick stop function	Yes
Idle speed	4250 RPM
Cutting height @ 45°	55 mm
Cutting height @ 90°	80 mm
Cross stop tilt angle range	-45 - 45 °
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Saw blade type	Single
Number of teeth	48
Number of saw blades	1
Package depth	615 mm
Package width	715 mm
Package weight	28600 g

Weight and Dimensions

Depth	750 mm
Width	610 mm
Height	380 mm
Weight	17460 g
Table depth	555 mm
Table width	580 mm
Bore diameter	30 mm
Blade diameter	254 mm
Height adjustment range	0 - 80 mm