EINHELL TC-TS 2225 U User Manual

GB
- 52 -
Danger! - Read the operating instructions to reduce the risk of in-
quiry
Caution! Wear ear-muff s. The impact of noise can cause damage
to hearing.
Caution! Wear safety goggles. Sparks generated during working
or splinters, chips and dust emitted by the device can cause loss of
sight.
Caution! Wear a breathing mask. Dust which is injurious to
health can be generated when working on wood and other materi-
als. Never use the device to work on any materials containing as-
bestos!
Caution! Risk of injury! Do not reach into the running saw blade.
Anl_TC_TS_2225_U_SPK7_Rewe.indb 52 24.03.2020 10:29:23

EINHELL TC-TS 2225 U Specifications

General

Product color	Red, Silver
Quick stop function	Yes
Idle speed	4250 RPM
Cutting height @ 45°	55 mm
Cutting height @ 90°	80 mm
Cross stop tilt angle range	-45 - 45 °
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Saw blade type	Single
Number of teeth	48
Number of saw blades	1
Package depth	615 mm
Package width	715 mm
Package weight	28600 g

Weight and Dimensions

Depth	750 mm
Width	610 mm
Height	380 mm
Weight	17460 g
Table depth	555 mm
Table width	580 mm
Bore diameter	30 mm
Blade diameter	254 mm
Height adjustment range	0 - 80 mm