EINHELL TC-TS 2225 U User Manual

GB
- 53 -
Danger!
When using the equipment, a few safety precautions must be ob-
served to avoid injuries and damage. Please read the complete
operating instructions and safety regulations with due care. Keep
this manual in a safe place, so that the information is available at all
times. If you give the equipment to any other person, hand over the-
se operating instructions and safety regulations as well. We cannot
accept any liability for damage or accidents which arise due to a
failure to follow these instructions and the safety instructions.
1. Safety regulations
General safety information for power tools
Warning!
Read all the safety information, instructions, illustrations and
technical data provided on or with this power tool. Failure to
adhere to the following instructions may result in electric shock, fi re
and/or serious injury.
Keep all the safety information and instructions in a safe
place for future use.
The term „power tool“ used in the safety information and instruc-
tions refers to power tools operated from the mains power supply
(with a power cable) and to battery operated power tools (without a
power cable).
1. Workplace safety
a) Keep your work area clean and well lit. Untidy or unlit work
areas can result in accidents.
b) Do not use this power tool in an area where there is a risk
of explosion and where there are infl ammable liquids, ga-
ses or dust. Power tools generate sparks that can ignite dust or
vapors.
c) Keep children and other people away from the power tool
Anl_TC_TS_2225_U_SPK7_Rewe.indb 53 24.03.2020 10:29:24

EINHELL TC-TS 2225 U Specifications

General

Product color	Red, Silver
Quick stop function	Yes
Idle speed	4250 RPM
Cutting height @ 45°	55 mm
Cutting height @ 90°	80 mm
Cross stop tilt angle range	-45 - 45 °
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Saw blade type	Single
Number of teeth	48
Number of saw blades	1
Package depth	615 mm
Package width	715 mm
Package weight	28600 g

Weight and Dimensions

Depth	750 mm
Width	610 mm
Height	380 mm
Weight	17460 g
Table depth	555 mm
Table width	580 mm
Bore diameter	30 mm
Blade diameter	254 mm
Height adjustment range	0 - 80 mm