EINHELL TC-TS 2225 U User Manual

GB
- 54 -
while you are using it. If you are distracted you may lose con-
trol of the power tool.
2. Electrical safety
a) The plug on the power tool must fi t into the socket. The so-
cket must not be modifi ed in any way. Do not use adapter
plugs together with power tools with a protective earth.
Unmodifi ed plugs and matching sockets will reduce the risk of an
electric shock.
b) Avoid body contact with earthed surfaces such as pipes,
heating systems, stoves and refrigerators. There is an incre-
ased risk of suff ering an electric shock if your body is earthed.
c) Keep the power tool out of the rain and away from moistu-
re. The ingress of water into an electric power tool increases the
risk of an electric shock.
d) Do not use the power cable for a purpose for which it is not
designed, for example to carry the power tool, hang it up
or to pull the plug out of the socket. Keep the power cable
away from heat, oil, sharp edges and moving parts. Power
cables that are damaged or tangled increase the risk of an elec-
tric shock.
e) If you use an electric power tool outdoors, use only exten-
sion cables that are suitable for outdoor use. The use of an
extension cable which is suitable for outdoor use reduces the
risk of an electric shock.
f) If you cannot avoid using the power tool in a damp loca-
tion, use a residual current device (RCD) circuit breaker.
The use of a residual current device (RCD) circuit breaker will
reduce the risk of suff ering an electric shock.
3. Safety of persons
a) Be careful, watch what you are doing and be sensible
and responsible when using an electric power tool. Never
use the power tool if you are tired or under the infl uence
of drugs, alcohol or medication. One moment of inattention
Anl_TC_TS_2225_U_SPK7_Rewe.indb 54 24.03.2020 10:29:24

EINHELL TC-TS 2225 U Specifications

General

Product color	Red, Silver
Quick stop function	Yes
Idle speed	4250 RPM
Cutting height @ 45°	55 mm
Cutting height @ 90°	80 mm
Cross stop tilt angle range	-45 - 45 °
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Saw blade type	Single
Number of teeth	48
Number of saw blades	1
Package depth	615 mm
Package width	715 mm
Package weight	28600 g

Weight and Dimensions

Depth	750 mm
Width	610 mm
Height	380 mm
Weight	17460 g
Table depth	555 mm
Table width	580 mm
Bore diameter	30 mm
Blade diameter	254 mm
Height adjustment range	0 - 80 mm