EINHELL TC-TS 2225 U User Manual

GB
- 55 -
when using the electric tool can result in serious injuries.
b) Wear personal safety equipment and always wear safe-
ty goggles. Wearing personal safety equipment such as dust
masks, non-slip safety shoes, a helmet or ear plugs, depending
on the type and application of the tool, reduces the risk of injury.
c) Make sure that the tool cannot start up accidentally. Ensure
that the power tool is switched off before you connect it to
the power supply and/or connect the battery pack, pick it
up or carry it. If you have your fi nger on the switch while carry-
ing the power tool or if you connect the power tool to the power
supply while it is switched on, this may cause accidents.
d) Remove all adjusting tools or wrenches before you switch
on the power tool. Any tool or wrench in a rotating part of the
power tool could cause injuries.
e) Avoid abnormal working postures. Make sure you stand
squarely and keep your balance at all times. This will enable
you to control the power tool better in unexpected situations.
f) Wear suitable clothes. Never wear loose fi tting clothes or
jewelry. Keep hair and clothing away from moving parts.
Loose clothing, jewelry or long hair can be caught by moving
parts.
g) If dust extraction devices and dust collection devices can
be fi tted, they must be connected and must be used cor-
rectly. The use of a dust extractor can reduce the dangers posed
by dust.
h) Do not allow yourself to be lulled into a false sense of se-
curity and do not ignore the safety regulations covering
electric power tools, even if you are familiar with the power
tool after having used it many times. Carelessness can lead
to serious injuries in just a fraction of a second.
4. Using and handling the power tool
a) Do not overload your power tool. Use the correct electric
tool for the job in hand. The correct tool will enable you to work
better and more safely within the specifi c performance range.
Anl_TC_TS_2225_U_SPK7_Rewe.indb 55 24.03.2020 10:29:24

EINHELL TC-TS 2225 U Specifications

General

Product color	Red, Silver
Quick stop function	Yes
Idle speed	4250 RPM
Cutting height @ 45°	55 mm
Cutting height @ 90°	80 mm
Cross stop tilt angle range	-45 - 45 °
Input power	1800 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Saw blade type	Single
Number of teeth	48
Number of saw blades	1
Package depth	615 mm
Package width	715 mm
Package weight	28600 g

Weight and Dimensions

Depth	750 mm
Width	610 mm
Height	380 mm
Weight	17460 g
Table depth	555 mm
Table width	580 mm
Bore diameter	30 mm
Blade diameter	254 mm
Height adjustment range	0 - 80 mm