EINHELL TC-SM 2534/1 Dual User Manual

GB
- 32 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes
Consumables* Saw blade
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TC_SM_2534_1_Dual_SPK9.indb 32Anl_TC_SM_2534_1_Dual_SPK9.indb 32 10.12.2019 13:23:4910.12.2019 13:23:49

EINHELL TC-SM 2534/1 Dual Specifications

General

Input power	2350 W
Power source	AC
AC input voltage	230-240 V
AC input frequency	50 Hz
Idle speed (max)	4000 RPM
Cutting width (90°)	340 mm
Miter setting (left)	-45 °
Miter setting (right)	45 °
Blade bore	30 mm
Blade diameter	250 mm
Saw blade included	-
Number of blade teeth	48
Dust extraction	Yes

Weight and Dimensions

Weight	14300 g
Package depth	575 mm
Package width	795 mm
Package height	460 mm
Package weight	19350 g